SOFTWARE RELEASES

IDC4E TRUCK 38.0.0 UPDATE
The world of industrial and commercial vehicles and buses is featured by constant innovations, even as far as developments connected to the electronic equipment is concerned, that is all the control units that manage the mechanical parts and assure they work properly on each vehicle. Therefore it is very important for all technical repairers to have appropriate diagnostic tools in order to be able to work on most of the vehicles successfully.

Thanks to the new IDC4E TRUCK 38 update that has just been released by TEXA, you can work on the most important and widespread vehicle makes with great efficiently. The TRUCK 38 update offers new very useful Wiring Diagrams and DASHBOARDS.

Following are only a few of the most important new diagnostic features in IDC4E TRUCK 38, dedicated to the most important makes in the industry and to the European market:

EUROPEAN MARKET
DAF
LF EEV and EU6:
- New adjustment and activation functions were developed for the PACCAR
CUMMINS Isbe Injection EEV and Eu6 system.
XF and CF EU6:
- New adjustments and activations were included, among which the VIN Writing for the PCI 2015 injection system.

FORD
Transit 2014, Transit Connect 2014 and Custom:
- The Trailer Module TRM, Front Control Display Interface Module FCDIM, Driver's side running board, Parking Aid Module PAM, Headlight Control Module HCM, Satellite navigation system, Auxiliary Heater Control module AHCM, Audio Control Module ACM systems were developed.

Transit Connect 2014:
- The new SID 208 system for 1.6TDCi engines was developed.

Cargo (South America):
- New functions on the ABS8 systems.

HYUNDAI
H series: Light Duty Truck [HD35>HD78]:
- The Immobilizer, (DTG) Central display, ABS Mobis systems were developed.

IVECO
Daily 2014:
- The new 8-speed transmission (8HP) system was developed
- The “Engine test” activations were added in the related diagnosis.
Daily 2012:
- The “Engine test” activations were added in the related diagnosis.
Daily 2009:
- The “Engine test” activations were added for the EDC17 engine control unit.
Eurocargo Restyling EU3
- The new configuration change, PTO setting change, accelerator pedal calibration, engine idle speed value setting adjustments were added for the EDC7 Diesel Injection system.
Stralis EU6:
- New variants for the EDC17CV41 injection control unit were developed.

MAN
TG-L and TG-M:
- New safety error memory clearing and control unit replacement functions were developed in the Wabco EBS2 system.
EU6 range:
- Error list update for all the Powertrain systems.
- The management of the Reset functions of the new maintenance system was improved.
- The new Emitec NoNOx exhaust gas treatment system was developed.

MERCEDES-BENZ
Actros MPII/MPIII:
- The front axle activations were included in the “HM Rear module + Suspensions” control unit;
- The new LWS Steering angle sensor system was developed.
Actros MPIV/Antos/Arocs EU6/Atego EU6/Econic EU6
- The new PPC Predictive Powertrain Control system was developed.

NISSAN/RENAULT
Nissan NV400 and Renault Master 3:
- The new EDC17C42 EU5+ injection system was developed.

RENAULT
Series DXI:
- Update of many systems installed on the Magnum and Premium DXI Eu5 models.

SCANIA
EU6 models:
- The exhaust gas treatment EEC3, suspension ELC4, transmission control GMS-OPC5 were developed.

VOLARE
W12/W8/W9:
- The new Instrumentation system with the Reset Service function was developed.

VOLKSWAGEN
Crafter:
- The new system with 2.0BiTDI engine management was developed.

VOLKSWAGEN TRUCKS
- New functions on the ABS8 systems
- The new ABS6 system was developed.

VOLVO TRUCK
FH and FM:
- Update of the diagnostic platform installed on the Euro 5 models.



NEW WIRING DIAGRAMS
Scania series R/P/G:
- S8 engine management system, tyre pressure monitoring system, compressed air supply, ICL Instrument Cluster, CCS Climate Control System, COO Coordinator module 7, DTCO Tachograph, EEC3 Exhaust gas treatment system.

Scania series R/P/G EU6:
- S8 engine management system, 5.0 brake management system, tyre pressure monitoring system, SMS-ELC4 Suspension Management System, compressed air supply, EEC3 Exhaust gas treatment system, ICL Instrument Cluster, COO 7 Coordinator module, GMS Gearbox Management System OPC, DTCO Tachograph, CCS Climate Control System.

Volkswagen Trucks:
Cummins ISBe Injection
Cummins ISCe Injection
16C8 injection for models 5-140/8-150
EDC7C1 injection for 6 and 4 cylinder models
PTM Power Train Module.

Cummins:
Cummins ISB/ Cummins ISB CM2150-CM850 /ISBe 4 and 6 cylinder/ISB4.5-6.7
injection systems.

Mercedes-Benz
The connector was added on the Actros MPIV MCM system
The connector was added on the Actros MPIV ACM system
Extension of the Brazilian models.



NEW DASHBOARDS
- DAF EAS1 system.
- Some previous DASHBOARDS were reviewed.



LATEST SW RELEASES

IDC5 MARINE 14 SOFTWARE UPDATE
The diagnostic coverage was enhanced and extended for the following makes: CATERPILLAR, CUMMINS MARINE, EVINRUDE, INDMAR, JOHNSON, MAN MARINE, MERCRUISER, MERCURY DIESEL, MERCURY RACING, PCM Marine Engines, SCANIA...

Read more

IDC5 OFF-HIGHWAY SOFTWARE UPDATE VERSION 19
The new diagnostic features included in the IDC5 OHW update 19.0.0 allow working on a large number of vehicles that belong to makes of the most popular manufacturers. The work TEXA's developers carried out on agricultural vehicles, telescopic handler...

Read more

IDC5 BIKE SOFTWARE UPDATE VERSION 32
The BIKE 32 update offers numerous new developments and technical contents that, along with the constant improvements and evolutions of the IDC5 software, guarantee a uniquely complete, top-notch solution to bike repairer...

Read more

IDC5 CAR 69.0.0 SOFTWARE UPDATE
IDC5 CAR 69.0.0 offers only the best multi-brand diagnosis. A number of high quality diagnostic developments, special functions and technical information that are essential in order to complete even the most complicated...

Read more

IDC5 TRUCK SOFTWARE UPDATE 46.0.0
The new diagnostic features included in the IDC5 TRUCK update 46.0.0 allow working on a large number of vehicles that belong to makes of the most popular manufacturers. The work TEXA's developers carried out on industrial vehicles, light commercial...

Read more

IDC5 OFF-HIGHWAY 18 SOFTWARE UPDATE
The new diagnostic features included in the IDC5 OHW update 18.0.0 allow working on a large number of vehicles that belong to makes of the most popular manufacturers. The work TEXA's developers carried out on AGRI and CONSTRUCTION...

Read more

SW releases archive