SOFTWARE RELEASES

IDC5 OFF-HIGHWAY SOFTWARE RELEASE 16.0.0
IDC5 OFF-HIGHWAY update 16 is the state of the art of multi-brand diagnosis for agricultural and earth-moving vehicles. It is an increasingly more powerful and complete software that allows mechanics to operate accurately and professionally on the most widespread and requested makes in the AGRI and CONSTRUCTION industry. IDC5 OHW 16 also presents new DASHBOARDs and new Wiring diagrams, for an even more thorough diagnosis.
Below is a list that examines some of the new features available starting from this OFF-HIGHWAY version, dedicated to the most important makes on the market divided into the categories AGRICULTURAL VEHICLES, CONSTRUCTION, CRANES/CONTAINER TRUCKS, INDUSTRIAL ENGINES.



Main new diagnostic features
Agricultural vehicles
LANDINI
- The new Series 4 Tractor model has been developed:
• Diesel injection;
• Instrument panel;
• Switchover board (power unit);
• Rear hydraulic linkage;
• Transmission.
- New systems have been developed for the Tractor Series 6:
• Rear hydraulic linkage;
• Transmission;
• Suspended axle;
• A/C system;
• Auxiliary couplers;
• Multifunction module;
• Instrument panel;
• Switchover board (power unit).
- The new Series 6 C Tractor model has been developed:
• Diesel injection;
• Instrument panel;
• Rear hydraulic linkage;
• Switchover board (power unit);
• Transmission;
• A/C system.
- The new Series 6 L Tractor model has been developed:
• Diesel injection;
• Instrument panel;
• Switchover board (power unit);
• Rear hydraulic linkage;
- The new Series 5 D Tractor model has been developed:
• Diesel injection;
• Instrument panel;
• Rear hydraulic linkage.

McCORMICK
- The new F-N Tractor model has been developed:
• Diesel injection;
• Instrument panel.
- The new V Tractor model has been developed:
• Diesel injection;
• Instrument panel.
- The new X50 Tractor model has been developed:
• Diesel injection;
• Instrument panel;
• Rear hydraulic linkage.
- The new X6.4 Tractor model has been developed:
• A/C system;
• Tier 3B diesel injection;
• Tier 4 diesel injection;
• SCR metering unit (DCU);
• Instrument panel;
• Rear hydraulic linkage.
- The new X7.4 Tractor model has been developed:
• Suspended axle;
• A/C system;
• Auxiliary couplers;
• Diesel injection;
• SCR metering unit (DCU);
• Multifunction module;
• Instrument panel;
• Switchover board (Power unit);
• Rear hydraulic linkage;
• Transmission.
- The new X7.6 Tractor model has been developed:
• Suspended axle;
• A/C system;
• Auxiliary couplers;
• Diesel injection;
• SCR metering unit (DCU);
• Multifunction module;
• Instrument panel;
• Switchover board (Power unit);
• Rear hydraulic linkage;
• Transmission.

CLAAS, NEW HOLLAND:
simplification of the models with automatic vehicle detection.

Construction
BOBCAT:
- The diesel injection system has been developed for Skid steers S & T:
• Metering unit (DCU);
• Bosch 17CV51 Tier4 diesel injection.
- The diesel injection system has been developed for the Excavator Series E:
• Metering unit (DCU);
• Bosch 17CV51 Tier4 diesel injection.
- The Deutz diesel injection system has been developed for the telescopic lifter
series T:
• Bosch EDC 17CV54 Tier 4i diesel injection

KASSBOHRER GELANDEFAHRZEUGE
- The new PistenBully Paana model has been developed:
• Cummins J1939 Core 2 diesel injection
- The new PistenBully Canyon model has been developed:
• Volkswagen Tier 3 diesel injection.

PERLINI
- The Dumper model systems have been updated:
• Detroit (Master and Slave) diesel injection
• Allison Transmission

SANDVIK
- The new Drills model equipped with Mercedes-Benz engine type has been
developed:
• Bosch MR, PF pump (PLD) diesel injection
• Adaptation module ADM 2 engine vehicle adjustment
- The Loader and Dumper models were updated with the new Volvo Penta Tier 4
engine type.

HITACHI
- The new ZW series 3 model has been developed:
• ECM Tier 3 diesel injection
• Transtron Tier 2/3 diesel injection
- The new ZX series 5 model has been developed:
• Multifunction Display
• GPS
• ECM Engine Control Module diesel injection
• Transtron Tier 2/3 diesel injection
• Engine vehicle adjustment

BELL
- The E Series (Dumper) Tractor model equipped with Mercedes-Benz engine type has been developed:
• Tier4 diesel injection
• ACM Exhaust gas after-treatment control module
• Allison transmission (Generation 3-4)
• Allison transmission (Generation 5)

PERLINI, O & K, HITACHI (Fiat-Hitachi), BOBCAT: simplification of the models with automatic vehicle detection.

Industrial engines
- The new Detroit industrial engine has been developed:
• Diesel injection (Master and Slave).

Wiring diagrams
New Holland T6
Systems:
• Diesel injection (1)
• Selective Catalyst Reduction (1)
• Automatic transmission (16x16, 24x24) (1)
• Front linkage
• Electronic linkage
• Power steering
• Hydraulic couplers
• Suspended front axle
• Front and rear PTO

New Holland T7
Systems:
• Automatic transmission (Autocommand CVT) (1)

Valtra S Series
Systems:
• Automatic transmission (1)
• Suspended front axle
• Hydraulic couplers
• Front linkage
• Rear linkage
• Power steering
• Power take-off
• HVAC
• Four-wheel drive

(1) systems with direct connection between the errors and the related wiring diagrams.


DASHBOARD
• Transmission Control Module system for CLAAS Arion 400 Series, with specific
dashboard for the power take-off.
• Rear linkage system for CLAAS Axion 800 Series Tractor.
• Rear linkage system for CLAAS Arion 400 Series Tractor.
• A/C system for CLAAS Axion 800 Series Tractor.
• A/C system for CLAAS Arion 400 Series Tractor.
• DCM system for JCB Loaders.
• General transmission diagnosis system for JCB 500 Series Loaders.
• PTO management system for Valtra N Series Tractor.
• PTO management system for Valtra T Series Tractor.



LATEST SW RELEASES

IDC5 BIKE SOFTWARE UPDATE 29.0.0
TEXA is synonymous with Technology, Innovation and Simplicity, all features that make its software and its tools the ideal solution for vehicle repairers. The BIKE update 29 is all this, a collection of diagnostic developments and technical information resulting from the work of a team of experts that day by day makes...
Read more

IDC5 CAR 65 SOFTWARE UPDATE
The new software update CAR 65 offers the best of the multi-brand diagnosis by TEXA: a large number of diagnostic developments, special functions and technical information that is essential in order to complete even the most complex workshop operations successfully.

Read more

IDC5 OFF-HIGHWAY SOFTWARE RELEASE 16.0.0
IDC5 OFF-HIGHWAY update 16 is the state of the art of multi-brand diagnosis for agricultural and earth-moving vehicles. It is an increasingly more powerful and complete software that allows mechanics to operate accurately and professionally on the most widespread and requested makes in the AGRI and CONSTRUCTION industry.

Read more

IDC5 TRUCK SOFTWARE UPDATE 42.0.0
IDC5 TRUCK 42 is the utmost expression of multi-brand diagnosis in the world of industrial and commercial vehicles, buses, trailers and semi-trailers, powertrains. A software increasingly more complete and powerful that allows all TEXA mechanics to work on a very large number of vehicles belonging to ...

Read more

IDC5 SOFTWARE UPDATE CAR 64
The new CAR 64 software update is actually a double version, as it also includes the diagnostic developments of update 63. Therefore, two versions in one, with the best multi-brand diagnosis made in TEXA: a large number of diagnostic developments, special functions and technical information that is essential to complete even the most complicated workshop operations successfully.

Read more

IDC5 BIKE SOFTWARE UPDATE VERSION 28.0.0
The BIKE update 28 is a collection of diagnostic developments and technical information that makes this software unique worldwide, other than complete and constantly updated. Its coverage extends to 75 makes, while, compared to the previous version, there is an increase of 18 new models, over 300 new wiring diagrams and 200 technical sheets.

Read more

SW releases archive