KONFORT 700 SERIES APPROVED BY:

AUDI - BENTLEY - BMW - BUGATTI - CHEVROLET - HYUNDAI - JAGUAR - KIA - LAMBORGHINI - LAND ROVER - MAZDA - MERCEDES-BENZ - MINI - MITSUBISHI - NISSAN - OPEL - PORSCHE - RENAULT - SEAT - SKODA - SUBARU - SUZUKI - TOYOTA - VOLKSWAGEN *

* Please check at your TEXA dealer which model and which refrigerant type is recommended by the manufacturers listed above.


DUAL GAS SOLUTIONS

TEXA is one of very few companies in the world that offers an air conditioning recharge station able to work with the older R134a refrigerant and the new R1234yf refrigerant (obligatory for newly homologated vehicles in Europe) at the same time. This station is the KONFORT 780R BI-GAS: it is equipped with two separate tanks and circuits so that, within a matter of minutes, you can switch between servicing vehicles with A/C systems filled with different refrigerants.

FOR R134A OR R1234YF REFRIGERANT

TEXA’s 760R, 760R BUS (for large A/C systems like those on buses and specialist vehicles) and 720R recharge stations can be configured to work either with the older R134a or with the new R1234yf. You need to specify which refrigerant you plan to work with when you purchase the station, but retrofit kits are available to switch refrigerant at a later date.

FOR R1234YF REFRIGERANT

KONFORT 707R and KONFORT 770S are two A/C charging stations especially designed for the new refrigerant gas R1234yf, mandatory for all the newly homologated European vehicles. They were built in compliance with the strict specifications required by German manufacturers. The model 770S is equipped with the refrigerant identifier kit as a standard.

FOR R134A REFRIGERANT

TEXA still offers three recharge stations, the KONFORT 705R, KONFORT 705R OFF ROAD and the 710R, exclusively for use with the older R134a refrigerant, which is still found in most vehicles on the road today. These stations offer the same excellent design and build as the top models in the KONFORT range, but are simpler in a number of details.

FOR R744 (CO2) REFRIGERANT

The KONFORT 744 recharge station was developed in collaboration with leading German car makers and is one of the very few solutions currently available that were specially designed to service and recharge the latest air conditioning systems for R744 refrigerant (C02).

 


FORMING GAS: TEXA’s SOLUTIONS FOR DETECTING LEAKS IN A/C SYSTEMS

The Forming Gas Kit is composed of three elements:


- the Forming Gas cart TTF 700 offers a complete and independent solution for leak detection. It is equipped with all the necessary tools to operate on A/C systems that use any type of refrigerant;


- the Forming Gas case, included in the purchase of the Forming Gas cart TTF 700 as part of its instrumentation, it can also be purchased separately to support the KONFORT A/C recharge stations (760R, 760R BUS, 770S, 780R and 744) in the leak detection;

- the H2 Detect Sniffer detects any hydrogen in the air with precision, allowing you to detect the leak location.




Forming Gas Cart TTF 700

 

– Dimensions: 1180x590x668 mm; Weight: 24.5 kg
– Suitable for A/C systems: R134a, R1234yf, R744
– Forming Gas tanks* supported up to 20 L
– Maximum pressure: 20 bar for R134a and R1234yf;
100 bar for R744
– Equipped with safety valve that opens completely in case the operating value is reached
– Manometer 100 bar, 100 mm CL1
– Service hoses: R134a (LP/HP) 3 m; R1234yf (LP/HP) 2.5 m; R744 (LP/HP) 2.5 m; Forming Gas tank 2.5 m
– Forming Gas tank pressure reducer: input operating pressure max 300 bar; output pressure max 100 bar
– Safety belt to secure the tank to the cart
– Forming Gas case (can also be sold separately)

* Forming Gas tank not included

Forming Gas case

 

– Dimensions: 470x350x190 mm; Weight: 7 kg
– Set of adapters for the coupling of the Forming Gas tank
– Forming Gas tank pressure reducer: input operating pressure 300 bar max, output 100 bar max
– Connection kit for KONFORT 744 including: Forming Gas quick coupler, 2500-mm flexible hose for high pressure connection
– Connection kit for KONFORT 760R, 760R BUS, 770S and 780R including: 150 mm hose, evacuation valve, safety valve
– Teflon seals

H2 Detect

 

– H2 measurement spectrum: from 0 to 2000 ppm
– Response threshold: the hydrogen concentration is measured in increases of 1 ppm
– Reaction time: 14 s
– The measuring sensor is positioned at the end of a flexible extension that is 200 mm in length.
– The tool also provides a visual and acoustic feedback about the hydrogen concentration
– Power supply: 2 x 1.5 V Mignon /AA
– Battery life: approx. 6 h (typical)
– Operating conditions: from -10 to 40 °C /from 14 to 104 °F
– Weight: approx. 200 g (battery included)
– EC directives: 94/9/EC (ATEX), 2014/30/EU