FORD

INFORMATION ON FORD
The FordEtis diagnostic and repair system has been updated and its functionality optimised in accordance with Euro 5/6 (EC Regulation 715/2007).
The repair system for independent operators provides the Ford Motor Company with a response to this legislation in the form of an on-line software update and repair system.

SYSTEM REQUIREMENTS
- PC with Microsoft Windows XP operating system.
- 2 GHz processor, 2 GB RAM, sufficient free space on the hard disk.
- Monitor with a resolution of 1024 x 768 pixels.
Internet connection with a minimum speed of 512 kb/s.

GUIDED PROCEDURE
- Go to the official website
- Select "Enter or register"
- Select "REGISTER AS IO"
- Accept the terms and conditions
- Compile all mandatory fields.

WHAT CAN BE DONE
 

NAVIGATOR TXC –TXT-NANO
List of compatible tools:
- TXT tools with a serial number starting with DNT
- TXC tools with a serial number starting with DNC
- NAVIGATOR NANO tools with a serial number starting with DNQ


DIAGNOSIS

ECU REPROGRAMMING

Not allowed

YES
 

NAVIGATOR TXC-TXT

List of compatible tools:
- TXT tools with a serial number starting with DNI or DNB
- TXC tools with a serial number starting with DNN



DIAGNOSIS

ECU REPROGRAMMING


Not allowed

YES
 

NAVIGATOR TXTs
List of compatible tools:
- TXT tools with a serial number starting with DNF or DNR




DIAGNOSIS
ECU REPROGRAMMING


Not allowed

YES



< Back



TEXA PASS-THRU: Info and details by manufacturer



TEXA VCI tools can be used in PASS-THRU mode on all makes that have certified their use. The end user must verify that his TEXA VCI is among those certified for use on the website of the relevant manufacturer. TEXA VCI tools can also be used in PASS-THRU mode on vehicle makes for which no specific homologation is required, with the provisions given below. This information can also be obtained by consulting the website of the relevant manufacturer. When there is no homologation procedure for certifying the complete compatibility of the manufacturer's diagnostic system with a TEXA VCI used in Pass-Thru mode, TEXA S.p.A. does not guarantee that the VCI will function correctly and cannot therefore be held responsible for partial or complete malfunctioning of the functions concerned. In PASS-THRU mode, TEXA VCI tools cannot be used to solve faults associated with special features of vehicle manufacturers' proprietary diagnostic systems not conforming to standard J2534-1/2. The end user must be aware of this and must accept full responsibility for any problems on a vehicle or in electronic devices on which he performs diagnostic and/or programming operations with a TEXA VCI. TEXA S.p.A. cannot be held responsible for problems, direct or indirect damage, costs or malfunctions in the vehicle or parts of the vehicle, appearing after or as a result of using a TEXA VCI in PASS-THRU mode.