VOLKSWAGEN

INFORMATION ON VOLKSWAGEN
Diagnostics can be performed on all Volkswagen, Audi, Skoda and Seat brand vehicles using this software.
The following information can be accessed during vehicle diagnostics:
- Vehicle data
- Repair guidelines
- Electrical wiring diagrams
- Field actions
- Product technical information
The above information is only available during the diagnostic session and through the relevant software.

SYSTEM REQUIREMENTS
System requirements for repair and maintenance information:
- Adobe Acrobat Reader
- Operating system: Windows 7, 8, 8.1, 10
- Web browser: Microsoft Internet Explorer 9 - 11 (other browsers are not compatible)
System requirements for Offboard Diagnostic Information System
- Operating system: Microsoft® Windows 7 (64 Bit) with Internet Explorer 11
- CPU: min. 1 GHz, recommended Dualcore 2 GHz processor
- RAM: min. 2 GB, recommended 4 GB + activated virtual memory
- HDU: min. 10 GB of free space (approx. 4 GB per brand + 1 GB per installed language)
- Graphics adapter: minimum 800 x 600, recommended 1024 x 768
- One free USB port for diagnostic interface
- DVD reader
- On-line connection
To run, simply connect the corresponding box with the diagnostic tester to the USB port and install the corresponding driver. Administrator rights are needed to install the software.
GUIDED PROCEDURE
- Go to the official website
- Select "my erWin"
- Register
To register, compile all mandatory fields then accept the terms of the erWin on-line contract and click "Registration" at the bottom to complete the procedure.

WHAT CAN BE DONE
 

*NAVIGATOR TXC –TXT-NANO
List of compatible tools:
- TXT tools with a serial number starting with DNT
- TXC tools with a serial number starting with DNC
- NAVIGATOR NANO tools with a serial number starting with DNQ


(*)These VCIs can be used on vehicles of the VAG Group (SEAT, SKODA, AUDI, VOLKSWAGEN) only in conjunction with VAS-PC diagnostic software.


DIAGNOSIS

ECU REPROGRAMMING

YES

NO
 

NAVIGATOR TXC-TXT

List of compatible tools:
- TXT tools with a serial number starting with DNI or DNB
- TXC tools with a serial number starting with DNN









DIAGNOSIS

ECU REPROGRAMMING


YES

NOT YET
 

NAVIGATOR TXTs
List of compatible tools:
- TXT tools with a serial number starting with DNF or DNR










DIAGNOSIS
ECU REPROGRAMMING


YES

YES



< Back



TEXA PASS-THRU: Info and details by manufacturer



TEXA VCI tools can be used in PASS-THRU mode on all makes that have certified their use. The end user must verify that his TEXA VCI is among those certified for use on the website of the relevant manufacturer. TEXA VCI tools can also be used in PASS-THRU mode on vehicle makes for which no specific homologation is required, with the provisions given below. This information can also be obtained by consulting the website of the relevant manufacturer. When there is no homologation procedure for certifying the complete compatibility of the manufacturer's diagnostic system with a TEXA VCI used in Pass-Thru mode, TEXA S.p.A. does not guarantee that the VCI will function correctly and cannot therefore be held responsible for partial or complete malfunctioning of the functions concerned. In PASS-THRU mode, TEXA VCI tools cannot be used to solve faults associated with special features of vehicle manufacturers' proprietary diagnostic systems not conforming to standard J2534-1/2. The end user must be aware of this and must accept full responsibility for any problems on a vehicle or in electronic devices on which he performs diagnostic and/or programming operations with a TEXA VCI. TEXA S.p.A. cannot be held responsible for problems, direct or indirect damage, costs or malfunctions in the vehicle or parts of the vehicle, appearing after or as a result of using a TEXA VCI in PASS-THRU mode.