VOLVO

INFORMATION ON VOLVO
Volvo Cars Technical Information Shop is accessible to all companies professionally involved in the maintenance and repair of Volvo cars.

The website is also aimed at customers wishing to service or repair their own Volvo cars or seeking additional information in general.

For residents in the USA, Canada and Porto Rico: Go to to North American website: www.volvotechinfo.com

Since Volvo uses cookies to track your navigation session, it is important for your browser to permit the use of cookies.
SYSTEM REQUIREMENTS
Processor: Core i3 and higher
Memory: 4 GB or more
Free space on local disk: 10 GB
Connections: 2 x USB 2.0 or higher
Operating system: Windows 7 Professional/Enterprise (64 bit) or Windows 8.1 Professional (64 bit)
File system: NTFS
Display resolution:
Aspect ratio: 16:9 16:10
Minimum resolution: 1280 x 720 1280 x 800



GUIDED PROCEDURE
- Go to the official website
- Select "Register a new company on first access" or "Register a new user on first access"
- Compile all mandatory fields
- Check the checkbox to accept Volvo's terms and conditions
- Select "REGISTER" to complete the registration
WHAT CAN BE DONE
 

NAVIGATOR TXC –TXT-NANO
List of compatible tools:
- TXT tools with a serial number starting with DNT
- TXC tools with a serial number starting with DNC
- NAVIGATOR NANO tools with a serial number starting with DNQ


DIAGNOSIS

ECU REPROGRAMMING

NO

NO
 

NAVIGATOR TXC-TXT

List of compatible tools:
- TXT tools with a serial number starting with DNI or DNB
- TXC tools with a serial number starting with DNN



DIAGNOSIS

ECU REPROGRAMMING


YES

NOT YET
 

NAVIGATOR TXTs
List of compatible tools:
- TXT tools with a serial number starting with DNF or DNR




DIAGNOSIS
ECU REPROGRAMMING


YES

YES



< Back



TEXA PASS-THRU: Info and details by manufacturer



TEXA VCI tools can be used in PASS-THRU mode on all makes that have certified their use. The end user must verify that his TEXA VCI is among those certified for use on the website of the relevant manufacturer. TEXA VCI tools can also be used in PASS-THRU mode on vehicle makes for which no specific homologation is required, with the provisions given below. This information can also be obtained by consulting the website of the relevant manufacturer. When there is no homologation procedure for certifying the complete compatibility of the manufacturer's diagnostic system with a TEXA VCI used in Pass-Thru mode, TEXA S.p.A. does not guarantee that the VCI will function correctly and cannot therefore be held responsible for partial or complete malfunctioning of the functions concerned. In PASS-THRU mode, TEXA VCI tools cannot be used to solve faults associated with special features of vehicle manufacturers' proprietary diagnostic systems not conforming to standard J2534-1/2. The end user must be aware of this and must accept full responsibility for any problems on a vehicle or in electronic devices on which he performs diagnostic and/or programming operations with a TEXA VCI. TEXA S.p.A. cannot be held responsible for problems, direct or indirect damage, costs or malfunctions in the vehicle or parts of the vehicle, appearing after or as a result of using a TEXA VCI in PASS-THRU mode.